| Item | Part # | Description |
| 5 | 1028N | Head set; Fork nut |
| 6 | 1028B | Head set; bearing (single) |
| 7 | 1028C | Head set; Bearing cup (single) |
| 8 | 1411 | Carry Loop, nylon |
| 9-A | 6109 |
| 9-B | 6110A | ESR Throttle Lever, See identification chart to select correct model |
| 9-C | 6110B | ESR Throttle Lever, See identification chart to select correct model |
| 10 | 1049 | Grip Set |
| 11 | 1048L | Brake Lever (Left) |
| 15 | GSR1042A | T-bar anodized, 24.75” |
| 16 | 1060 | Safety Spring |
| 17 | 1022 | Slide Tube Assmbly |
| 19 | MD1027BK | Front Fork, single sided, 10” wheel, Maddog brake, Candy Red or BlacK |
| 20 | 1090 | Bolt; Maddog Brake Mount; M6x12 |
| 21 | 1083A | Maddog Brake Caliper |
| 23 | 6128 | Kickstand; complete; black with spring and rubber foot |
| 24 | GSR1035 | Bolt; ¼-20 x 1.5” Button Head for kickstand mount |
| 25 | 1076 | Washer, ¼” SAE flat |
| 27 | BF1033 | Bolt; front axle; 5/8-18 x 6" |
| 28 | 6114 | Bolt; deck mount; 1/4-20 x 1-3/4 Torx Flat Head thread cutting (tool size T30) |
| 29 | E1006 | Deck, with grip tape and foam, (ESR750 & ESR Sport, Not EX deck) |
| 33 | KN1009 | Nut; 1/4-20 Nylock |
| 38 | 1026 | Nut, M6 low nylock |
| 39 | BF1036 | Washer; axle; 1"OD x 5/8" ID x .060" |
| 40 | 6133 | Bolt; motor mount; M6x18 Socket head |
| 41 | 1401 | Bolt; motor mount; M6x35 SHCS |
| 42 | TB1028 | Steel Tube, inserts into plastic chain guide, 3/8”x.78” |
| 43 | 6102 | Chain guide, plastic |
| 44 | 111130020 | Electric Motor |
| 45 | 6113A | Controller board (left side of pan, with attached wires) |
| 46 | 6115 | Screw; controller mount; ( 6 x 5/8" Hex washer head) |
| 47 | 6148 | Wire; DC interconnect; Controller to NEW charger |
| 48 | 6118A | Charger (New style with aluminum “U” housing) |
| 49 | 6013 | Screw; Charger Mount;(10-32 x 5/16 hex wshr head) |
| 50 | 6108A | A/C Inlet; (for new charger) |
| 51 | 6136 | Pop rivet; for A/C Inlet |
| 52 | 6016 | Bolt; fender mount; 10-32 x ½” Philips Head (type F) |
| 53 | 6015 | Bolt; fender mount; M4x12 Socket Head |
| 54 | 6008 | Fender; rear; ESR750 &EX |
| 55 | 2001 | Deck Grip Tape Set |
| 57 | ESR1001BK | Frame, ESR750 Candy Red or BlacK |
| 60 | BF1038B | Spacer, wheel bearing, Mag Rim (10" PT) |
| 61 | BF1038A | Bearing; Mag Wheel; 10" (PT) |
| 62 | 2026M | Wheel; 10"PT, 2pcs. Magnesium |
| 63 | BF1058T | Inner Tube; 10"PT |
| 64 | BF1059O | Tire; no tube, Powerplay TT |
| 66 | 1087 | Spacer; front wheel to brake disk |
| 67 | 1088 | Bolt 3/8-24 x 3.5" Low hex head; front wheel assy |
| 68 | 8008 | Nut; 3/8-24 center lock |
| 69 | 8003SS | Brake Disc, hardened stainless steel |
| 70 | BF1037 | Nut; axle, 5/8-18 nylock |
| 71 | 6127 | Spacer; rear axle, stepped for fender |
| 72 | GSR1045 | Bolt; Rear wheel assembly; 3/8"-24 x 3" Button Head |
| 73 | GSR1014 | Spacer; Wheel to sprocket |
| 74 | 6006 | Set screw for sprocket; (M5 x 8) |
| 75 | 6009.15 | Sprocket, 15 tooth, #25 (set screw (p/n 6006) not included) |
| 76 | GSR1013.1 | Sprocket; 76 tooth (alum) |
| 76 | GSR1013.75 | Sprocket; 75 tooth (alum) |
| 78 | 6003 | Rubber Plug; installs into rear of pan; holds data plug |
| 79 | 6107 | Battery Pan; ESR750 and EX, not Sport. Black |
| | 6107R | Battery Pan; ESR750 and EX, not Sport. Red |
| 80 | 6120C | Foam Pad; 1/8” thick ( installs under batteries) |
| 81 | 6131 | Rubber pan dust shield. Square 2”x2” w/ center hole |
| 82 | 6121 | Plastic insulation tape; white; prevents short between pan & batteries |
| 83 | 6119C | Foam Rubber Tape; 1/4"x 1/2"; sold per ft. ( Also used on deck) |
| 84 | 6005 | Battery; HR6-12 T2 SLA (ESR750 & Sport, Not EX) ESR750EX batteries are on Page 2 |
| 85 | 111130009 | Battery connector; Joins each pair of batteries |
| 87 | 1404 | Bolt; rear axle 5/8-18 x 7.5" |
| 100 | 1043 | Lower hinge FTG. assy; Aluminum |
| 101 | 1044 | Bolt; lower hinge FTG. 5/16-24 |
| 102 | 1043A | Lower hinge FTG; clear anodized aluminum |
| 103 | 1045 | Wedge lug; lower hinge FTG. |
| 104 | 1056 | Handle hinge pin |
| 106 | 6103 | Chain; #25 Hard, 106 link (ESR750 & EX; not Sport) |
